| 2) “Sealed Secondary Cells / Batteries Containing Alkaline or Other Non-Acid Electrolytes for Use in Portable Applications |
External short circuit |
IEC 62133-2:2017
(Clause 7.3.1 & 7.3.2) |
Rs. 80,007/- |
| Thermal abuse |
IEC 62133-2:2017
(Clause 7.3.4) |
| Crush |
IEC 62133-2:2017
(Clause 7.3.5) |
| Free fall |
IEC 62133-2:2017
(Clause 7.3.3) |
| Over-charging of battery |
IEC 62133-2:2017
(Clause 7.3.6) |
| Forced discharge |
IEC 62133-2:2017
(Clause 7.3.7) |
| 3) “Safety requirements for electrical equipment for measurement, control,and laboratory use” |
Mains Supply |
IEC 61010-1:2010
(Clause:5.1.3) |
Rs. 65,007/- |
| Equipment temperature limits and resistance to heat |
IEC 61010-1:2010
(Clause: 10.1-Cl.10.4) |
| Single fault test |
IEC 61010-1:2010
(Clause: 4.4.4) |
| Durability of markings |
IEC 61010-1:2010
(Clause: 5.3) |
| Determination of ACCESSIBLE parts |
IEC 61010-1:2010
(Clause: 6.2) |
| Touch Current |
IEC 61010-1:2010
|
| Protective Bonding |
IEC 61010-1:2010
(Clause: 6.5.2) |
| Plugs & Connectors (Capacitor discharge test) |
IEC 61010-1:2010
(Clause:6.10.3) |
| Clearance & Creepage distance |
IEC 61010-1:2010
(Clause: 6.7.2.1 & 6.7.2.3, 6.7.3.3) |
| Humidity conditioning test |
IEC 61010-1:2010
(Clause: 6.8.2) |
| Cord entry test |
IEC 61010-1:2010
(Clause: 6.10.2.1) |
| Cord anchorage test |
IEC 61010-1:2010
(Clause: 6.10.2.2) |
| Stability test |
IEC 61010-1:2010
(Clause: 7.4) |
| Drop Test |
IEC 61010-1:2010
(Clause: 8.3) |
| Limited Energy Circuit measurements |
IEC 61010-1:2010
(Clause: 9.4) |
| Impact Test |
IEC 61010-1:2010
(Clause: 8.2.2) |
| Stress Relief |
IEC 61010-1:2010
(Clause: 10.5.2) |
| Ball Pressure Test |
IEC 61010-1:2010
(Clause: 10.5.3) |
| 4) "Standard for Environmental Testing of Telecommunication Equipment, (QM-333: march, 2010)" |
Low temperature Test (Cold Cycle) |
Test no. 1 Section 3
QM-333: march, 2010 |
Rs.65,007/- |
| High temperature Test (Dry Heat Cycle) |
Test no. 2 Section 3
QM-333: march, 2010 |
| Tropical Exposure Test (Damp Heat Cycle) |
Test no. 3 Section 3
QM-333: march, 2010 |
| Rapid Temperature Cycle Test |
Test no. 4 Section 3
QM-333: march, 2010 |
| Damp heat (Steady State) |
Test no. 5 Section 3
QM-333: march, 2010 |
| Sealing Test (GAS tightness) / High altitude test |
Test no. 7 Section 3
QM-333: march, 2010 |
| 5) "Mobile Phone Handsets Part 3 Indian Language Support for Mobile Phone Handsets - Specific Requirements (First Revision) IS 16333:(Part 3)2017" (TEC ER no:. TEC/ER/MT/MUE-001/01/APRIL 2018 Cl. No. 5.4) |
Language supportable test/ Marking requirements on Mobile phone |
IS 16333(Part 3):2017 Clause 1, 2, 3, 4, 5, 6, Annex A, B & C |
Rs.50,007/- |
| (Reference standard IS 16350:2016+A1:2017 for Enhanced In-script Keyboard Layouts) |
| 6) Mobile Phone Handsets Part 1 Safety Requirements |
Cl 4.8 International Mobile Station Equipment Identity(IMEI) |
IS 16333(Part 1):2015 Cl 4.8 |
Rs.45,007/- |
7) Mobile Phone
(TEC ER no:. TEC/ER/MT/MUE-001/01/APRIL 2018 Cl. No. 5.3) |
Panic button in new mobile handset |
Notification of Government of India Gazette Notification No. G.S.R. No. 436 (E) dated 22-04-16 GPS in new mobile hand set. |
Rs.45,007/- |
| GPS in new mobile hand set. |
Notification of Government of India Gazette Notification No. G.S.R. No. 1441 (E) dated 23-11-2017 GPS in new mobile hand set. |
Rs.45,007/- |